|
Received an upvote
|
August 11, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Posted an answer
What is a falling load generator?Falling load generator When we are setting up an exposure parameter, for a particular part of the body to be exposed, we follow a three parameter setting, i.e KVp, mA and time or two parameter setting,... |
August 7, 2020 |
5 |
|
Posted an answer
GE Voluson P8 – 4D probe (RICS-9A-RS) showing error – Can it be repaired?Hi Good Morning.. There are probe repair facilities available. You may contact the service coordinator 089712 23957 |
August 7, 2020 |
5 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Received an upvote
|
August 7, 2020 |
10 |
|
Posted an answer
Vision 100 X-Ray machine Technical Specifications pleaseTechnical Specification As per information provided by the manufacturer • Generator Rating Radiography 100 mA at 100 kVp Fluoroscopy 5 mA at 100 kVp • Tube Current Radiography... |
August 7, 2020 |
5 |
|
Posted an answer
Is Conventional X-Ray same as line frequency X-Ray?Out put Waveform of line frequency generators |
August 7, 2020 |
5 |
|
Posted an answer
Is Conventional X-Ray same as line frequency X-Ray?Yes, conventional x-ray machines are line frequency generators, i.e 50Hz, in a half wave rectified circuit and 100Hz in a full wave rectified circuit. There are direct 3 phase generators, and in that... |
August 7, 2020 |
5 |
|
Registered
|
August 7, 2020 |
10 |
